AN025 - Application's update procedure with MMC/SD on R401

PRELIMINARE/

1) Format MMC/SD card

2) Copy the files sent into the SD/MMC card

3) Insert MMC/SD card in the PLC

1.jpg
:dn:
2.jpg
:dn:
3.jpg

4) 4) Power Up the PLC with FUNC button pulsante_6x6.jpg pressed

4.jpg
:dn:
5.jpg

5) Keep FUNC button pulsante_6x6.jpg pressed till the activation of LED L1 fix

6.jpg

6) Press several times FUNC button pulsante_6x6.jpg till the activation of LED L1 and L3 both

7.jpg

7) Press BOOT button pulsante_6x6.jpg to start function

8) Please wait about 3 minutes till the deactivation of L1 and L3 led, then wait for activation of POWER and RUN led

9) Power Down. Pull out the MMC/SD. Power Up the PLC